Written price first · Haul-away included
Appliance Installation in Atlanta, GA
Bought a new appliance? We install it to manufacturer specification, test every connection, haul away the old unit and show you how it works, in one visit.
- Haul-away included
- Any store's appliance
- Hard-wired connections and gas line hookups by a licensed contractor
- 60-day workmanship warranty
A new refrigerator, dishwasher or range only performs the way it should when it is installed the way the manufacturer intended: level, sealed, vented and connected to the right supply. We install across Metro Atlanta, for units bought from big-box stores, local dealers and online retailers alike.
We bring the cords, connectors, braided hoses, vent duct and brackets the job needs, so there is no second trip to the hardware store. Every water connection is checked under pressure, and every installation is covered by our 60-day workmanship warranty.
Still deciding whether to replace? Read our repair-or-replace guide and how long appliances last first; a repair may buy years for less.
What we install
Installation services
Refrigerator installation
Leveling, door swing, water line connection for ice and water, and a leak check on the supply valve. We also remove doors and handles when a unit has to pass through a tight doorway.
Repair instead? →Dishwasher installation
Water supply, drain with a proper high loop or air gap, electrical connection, leveling and mounting to the counter. We remove the disposal knockout plug, the mistake behind countless "new dishwasher will not drain" calls.
Repair instead? →Washing machine installation
New braided stainless supply hoses, a secured drain hose, leveling and shipping-bolt removal on front-loaders. An unlevel or bolted washer will destroy itself, so we do it right.
Repair instead? →Dryer installation
Gas and electric dryers: the correct 3- or 4-prong 240V cord for your outlet on electric models, and rigid or semi-rigid metal vent duct with the shortest possible run. Vent airflow is verified before we leave. A gas line hookup is made by a licensed gas contractor.
Repair instead? →Range and cooktop installation
Gas, electric and induction ranges and cooktops: the correct 240V cord for your outlet on electric models, anti-tip bracket and leveling. Cooktop installation includes cutout verification and sealing. Hard-wired cooktops need a licensed electrician for the electrical connection, and gas line hookups need a licensed gas contractor.
Repair instead? →Wall oven installation
Cabinet fit verification, secure mounting and trim. Wall ovens are usually hard-wired, and that electrical connection must be made by a licensed electrician; we tell you before booking. Double ovens and combination units are heavy and require two technicians.
Repair instead? →Over-the-range microwave installation
Mounting bracket, top-cabinet bolts, vent configuration (exterior or recirculating) and electrical connection.
Repair instead? →Garbage disposal and ice maker installation
New disposals with dishwasher inlet connected and tested, and stand-alone or built-in ice makers with a dedicated water line.
Repair instead? →
What we run into
Common issues we solve during installation
Most installation problems are discovered on the day, so we check the connections, fit and venting before we start.
Mismatched electrical connections
Three-prong versus four-prong dryer cords, missing 240V receptacles and hard-wire requirements on wall ovens. A new or changed outlet or a hard-wired connection is work for a licensed electrician, and we tell you before the visit.
Plumbing that does not fit
Old shutoff valves that will not close, undersized supply lines and drain connections without a high loop.
Improper dryer venting
Crushed foil hoses, runs that are too long and disconnected joints in the wall. We correct what we can reach and tell you when a duct needs replacement.
Space and cutout problems
Refrigerators that do not fit the opening, cooktop cutouts that are the wrong size and dishwashers that will not go under a new countertop.
Gas line hookups
Gas ranges, cooktops and dryers need a licensed gas contractor or your gas utility to connect the gas line and check it for leaks. We set, level and vent the appliance and tell you before the visit when a gas hookup is needed.
Smart appliance setup
We connect Wi-Fi-enabled appliances to your network and the manufacturer app so the features you paid for actually work.
Our process
How an installation goes
- 01
Consultation and measurements
We confirm the model, the opening dimensions, the utility connections and the delivery route before installation day so there are no surprises.
- 02
Preparation
Floors are protected, the path is cleared and the old appliance is disconnected safely and staged for removal.
- 03
Installation
The new unit is connected to manufacturer specification, leveled, secured and sealed. Every water connection is tested.
- 04
Testing and calibration
We run a full cycle, verify temperatures and drainage, and calibrate settings before we consider the job done.
- 05
Walk-through and haul-away
We show you the controls and the maintenance basics, answer questions and haul away the old appliance and the packaging.
Why it matters
Why professional installation
Safety
An unsecured range that can tip, a dryer vent that traps lint or a refrigerator water line that drips inside a wall are the kinds of failures that cause fires, injuries and mold. Professional installation removes those risks.
Warranty protection
Most manufacturer warranties require correct installation. A voided warranty on a new appliance is an expensive mistake, and professional installation is the cheap insurance against it.
Longevity
Level appliances, correct venting and proper water connections mean fewer failures over the life of the unit.
Done once
We arrive with the cords, connectors, hoses, ducting and brackets the job needs, so the installation is finished in one visit.
Brands we install
- Samsung
- LG
- Whirlpool
- GE
- Frigidaire
- Maytag
- KitchenAid
- Bosch
- Kenmore
- Sub-Zero
- Wolf
- Viking
- Thermador
- Miele
- Amana
- Electrolux
- JennAir
- InSinkErator
- GE Profile
- Café
- Monogram
- Hotpoint
- Haier
- Gaggenau
- Admiral
- Asko
- Bertazzoni
- Dacor
- Fisher & Paykel
- Magic Chef
- IKEA
- Sharp
- Speed Queen
- Waste King
- Moen
Don't see your brand? See every brand we service.
FAQ
Appliance installation questions
What types of appliances do you install in Atlanta?
Refrigerators, dishwashers, washers, dryers, ranges, cooktops, wall ovens, over-the-range microwaves, garbage disposals, ice makers and freezers, including built-in and panel-ready units.
Do you install both gas and electric appliances?
Yes. We install gas and electric ranges, cooktops and dryers. We fit the correct 240V cord on electric dryers and ranges; a new or changed 240V outlet, a hard-wired connection or a gas line hookup is work for a licensed electrician or gas contractor, and we tell you before the visit.
Will you remove my old appliance?
Yes. Haul-away of the old unit is included in most installations. Let us know when you book so the technician plans the space in the van.
How long does an installation take?
Most installations take 45 minutes to two hours. Built-in refrigerators, wall ovens and panel-ready dishwashers take longer.
Do I need to do anything before you arrive?
Clear a path to the location, empty the old appliance if it is a refrigerator or freezer, and make sure the new unit is on site or scheduled for delivery before our window.
Do you install appliances I bought from any store?
Yes. We install units purchased from Lowe’s, Home Depot, Best Buy, Costco, local appliance dealers or online retailers, as well as units you already own.
Can you install built-in appliances like wall ovens and integrated refrigerators?
Yes. Built-in installation requires precise leveling, trim work and often custom panel fitting, so we plan extra time for it and quote it before booking. Hard-wired wall ovens also need a licensed electrician for the electrical connection.
What if my home’s connections do not match the new appliance?
We convert cords, adapt water lines and adjust drain connections on site in most cases. Work that requires a new circuit or gas line is referred to a licensed electrician or plumber, and we will tell you before we start.
Do you provide a warranty on installations?
Yes. Our installation workmanship is covered for 60 days, in addition to the manufacturer warranty on the appliance itself.
What should I do if the appliance does not work after installation?
Call us. If the problem is related to the installation we return at no charge; if the appliance itself is defective we help you document it for the manufacturer or retailer warranty claim.
Ready to have it installed right?
Call, text or book online in under two minutes; phones are answered 24/7. The $80 diagnostic is waived when you approve the repair.
Questions first? Contact us.